Quick Menu

Partial Discharge Tester

PartialDischargeTester Model19501-K
  • CE Mark
  • Rohs 2 Compliant
Partial Discharge Tester
Model 19501-K
  • Built-in Hipot test and PD detector function in one instrument
  • Programmable voltage output: 0.1KVac~10KVac
  • PD (Partial Discharge) detection range: 1 pC~2000 pC
  • High accuracy and resolution current meter: 0.01uA~300uA
PartialDischargeTester Model19501
  • CE Mark
  • Rohs 2 Compliant
Partial Discharge Tester
Model 19501
  • Separate design for AC high voltageoutput with PD measurement and mainframe
  • Built-in regulation test methods
  • 3-stage voltage testing method
  • PD failure count setting (1-10)
  • Application: IGBT, SiC-MOSFET, photocoupler, digital isolator, isolated control IC, isolated D/D power, small/large transformer, motor.

Electrical Safety Analyzer

WoundComponentESTAnalyzer Model19036
  • CE Mark
  • Rohs 2 Compliant
Wound Component EST Analyzer
Model 19036
  • 5 in 1 composite analyzer scanner (ACW/DCW/IR/IWT/DCR)
  • Hi-pot test (5kVac / 6kVdc, HSCC, 500 VA output)
  • 5kV Insulation Resistance test (IR)
  • Impulse Winding Test (IWT)
ElectricalSafetyAnalyzer Model19032/19032-P
  • CE Mark
  • Rohs 2 Compliant
  • TUV
Electrical Safety Analyzer
Model 19032/19032-P
  • 5 In 1 (ACV/DCV/ IR/GB/LC Test)
  • 500VA Power Rating
  • Twin-Port function
  • Open / Short Check(OSC)
WoundComponentESTScanner Model19035Series
  • CE Mark
  • Rohs 2 Compliant
Wound Component EST Scanner
Model 19035 Series
  • 4 in 1 (AC/DC/IR/DCR Test)
  • 8 Channel Scanner
  • 5kV Insulation Resistance test
  • High speed contact check

Hipot Tester / Safety Tester

Multi-ChannelHipotTester Model19020Series
  • CE Mark
  • Rohs 2 Compliant
Multi-Channel Hipot Tester
Model 19020 Series
  • 10 channels in one device
  • 10 sets of sync output and measurement
  • ACWV, DCWV, IR 3-in-1 EST test
HipotTester Model19052/19053/19054
  • CE Mark
  • Rohs 2 Compliant
  • TUV
  • UL
Hipot Tester
Model 19052/19053/19054
  • 3 In 1 (ACV/DCV/IR Test)
  • 8 / 4 channels scanner
HipotAnalyzer Model19056/19057Series
  • CE Mark
  • Rohs 2 Compliant
Hipot Analyzer
Model 19056/19057 Series
  • Up to 10kV AC & 20kV DC 
  • Provides high withstand voltage analysis
HipotTester Model19070Series
  • CE Mark
  • Rohs 2 Compliant
  • TUV
  • UL
Hipot Tester
Model 19070 Series
  • Economy type
  • 3 In 1 (ACV/DCV/IR Test)
HipotAnalyzer Model19055/19055-C
  • CE Mark
  • Rohs 2 Compliant
Hipot Analyzer
Model 19055/19055-C
  • Hipot test
    ACW 5kV/100mA
    DCW 6kV/25mA 
  • Insulation Resistance test
    5kVmax
    1MΩ~50GΩ 
  • 500VA output

Impulse Winding Tester

SurgeTester Model19311Series
  • CE Mark
  • Rohs 2 Compliant
Surge Tester
Model 19311 Series
  • Max. output voltage: 6kV (Depends on DUT's capacitance)
  • Pulse interval: 30ms ~ 3000ms
  • 8 types of judgments
ImpulseWindingTester Model19305Series
  • CE Mark
  • Rohs 2 Compliant
Impulse Winding Tester
Model 19305 Series
  • High impulse test sampling rate (200MHz),10bits
  • 6kV impulse voltage test
  • Breakdown voltage analysis function
  • High speed test
ImpulseWindingTester Model19301A
  • CE Mark
  • Rohs 2 Compliant
Impulse Winding Tester
Model 19301A
  • Wide range inductance test application(0.1uH~100uH).
  • Impulse Winding Test high sampling rate(200MHz).
  • Contact check & test voltage compensation by measured inductance.
  • B.D.V function(BreakDown Voltage test)

Automatic Test System (ATS)

InductorTest&PackingMachine Model1870DSeries
  • CE Mark
Inductor Test & Packing Machine
Model 1870D Series
  • Automated Production for Power Inductors
  • Test and packing speeds from 80ppm to 1,200ppm
InductorLayerShortATS  Model1871
  • CE Mark
Inductor Layer Short ATS 
Model 1871
Test and packing speeds from 600ppm to 1500ppm
MedicalElectricalSafetyATS Model8910
  • CE Mark
Medical Electrical Safety ATS
Model 8910
  • Support electrical safety test and function test scanning
  • Support customize function test (option)
  • Open architecture software 
HighCapacitanceElectrolyticCapacitorATS Model1911
High Capacitance Electrolytic Capacitor ATS
Model 1911
  • Test parameter LC/C/D
  • Test 8 electrolytic capacitors
  • Constant current for test leakage current
ElectricalEquipmentATS Model8900
  • CE Mark
Electrical Equipment ATS
Model 8900
  • Open architecture software
  • Expandable hardware
This website uses cookies to improve functionality and performance. By continuing to use this website, you are giving implied consent to the use of cookies on this website. For latest or related information, please check our privacy policy.